Sun Microsystems Sun Fire V480, Administration Manual

Page: 166 / 270

138 Sun Fire V480 Server Administration Guide • February 2002
What Next
The
/etc/remote
file is now properly configured. Continue establishing a
tip
connection to the Sun Fire V480 server’s system console. See “How to Access the
System Console via tip Connection” on page 134.
How to Verify Serial Port Settings
This procedure lets you verify the baud rate and other serial port settings used by
the Sun Fire V480 server to communicate with attached serial port devices.
Before You Begin
You must be logged in to the Sun Fire V480 server, and the server must be running
Solaris operating environment software.
What to Do
1. Open a shell tool window.
2. Type:
3. Look for the following output:
This line indicates that the Sun Fire V480 server’s serial port is configured for:
■
9600 baud
■
8 bits
■
No parity
■
1 stop bit
■
No handshake protocol
# eeprom | grep ttya-mode
ttya-mode = 9600,8,n,1,-