28
Sun Fire 280R Server Setup and Rackmounting Guide • January 2001
Restore the Rack Enclosure
See the instructions provided with your rack enclosure to complete these steps.
1. Route and manage the AC cable and other cables within the rack enclosure.
2. Retract the enclosure’s anti-tip legs, if applicable.
3. Replace the side panels, if applicable.
4. Replace the front and back doors, if applicable.
Power On the System
You need the system key to perform this procedure.
Caution –
Never move the system when the system power is on. Movement can
cause catastrophic disk drive failure. Always power off the system before moving it.
Caution –
Before you power on the system, make sure that the cover is properly
installed.
1. Turn on power to any peripheral and external storage devices.
2. Turn on power to the monitor or terminal, if applicable.
