6
Sun Fire 280R Server Setup and Rackmounting Guide • January 2001
Before You Begin the Installation
■
Unpack the system and verify the contents. See Chapter 1 for instructions.
■
Unpack the accessory box and place the assembled slides and hardware on a clear
work surface.
■
Verify that you have the components and hardware shown in “Accessory and
Slide Assembly Box Contents” on page 3.
■
Read the rack enclosure requirements described in Appendix A of this guide to
ensure that you meet the enclosure requirements.
■
Read the safety precautions that follow the “Tools Required” section.
■
For faster installation and setup, use two sets of the required tools. Two persons
are required to install the server.
Tools Required
■
Phillips No. 2 screwdriver
■
Flat-blade screwdriver
■
Set of appropriate Allen wrenches to remove the side panels on some rack
enclosures
■
Adjustable wrench to tighten the nuts on the mounting brackets
■
Spirit level for leveling the rackmount enclosure front-to-back and
side-to-side (if necessary)
