Chapter 2
Installing the Library
29
3. Make sure to orient each cartridge properly (
FIGURE 2-14
).
FIGURE 2-14
Correct Tape Cartridge Orientation
4. Reaching in through the front doors of the library, insert a tape cartridge into each
of the nine storage bins above the tape drives.
Each cartridge should slide into place with very little force. If a cartridge does not
slide into place easily, check the cartridge for correct orientation and structural
integrity.
5. Insert a cartridge into each of the five storage bins above and below the load port
at the front of the library.
This requires that you reach into the library through the front doors and then back
toward the front. There are four bins above the load port and one bin below.
6. Make sure each cartridge is properly seated in the bin. See
FIGURE 2-14
for correct
cartridge orientation.
Bar code label
Write-protect switch
TH00011a
Insertion arrow
Summary of Contents for StorEdge L1000
