Appendix B
Relocating the Library
95
▼
To Uncrate the Library
1. Open the top of the shipping carton by carefully cutting the packaging tape.
The following items are stacked on top of the library:
■
Accessories tray
■
Ramp (stand-alone library) or slide assembly (rackmount library)
2. Remove these items from on top of the library and set them aside.
3. Remove all foam supports inside the carton.
4. Release the four clips that secure the carton to the pallet.
To release a clip, pinch the center tabs firmly together and pull on the tabs.
5. Lift the carton off the pallet. Set the carton aside.
6. Open the shipping bag by removing the tape or cutting the bag along its seam.
7. If unpacking a stand-alone library, remove the library from the pallet as follows:
a. Remove the foam supports from between the library and the pallet.
b. Attach the ramp to the pallet.
c. Carefully guide the library down the ramp as a second person pushes the
library from the back.
8. Store all packing materials for future use.
Summary of Contents for StorEdge L1000
