TABLE 1–1
Task Map: Installing a Storage Array
(Continued)
Task
Information
Adding arrays to an existing cluster, using a
single-controller configuration.
“How to Add a Single-Controller
Configuration to an Existing Cluster”
on page 22
Adding arrays to an existing cluster, using a
dual-controller configuration.
“How to Add a Dual-Controller
Configuration to an Existing Cluster”
on page 26
Storage Array Cabling Configurations
You can install your storage array in several different configurations. Use the
Sun
StorEdge 6120 Array Installation Guide
to evaluate your needs and determine which
configuration is best for your situation.
The following figures illustrate example configurations.
shows two storage arrays, and two have controllers. The storage arrays
connect to a 2-node cluster through two switches. Dual-controller configurations
require software RAID-1 (host-based mirroring).
12
Sun Cluster 3.0-3.1 With Sun StorEdge 6120 Array Manual for Solaris OS • January 2006, Revision A
