Sun Microsystems StorEdge 6120 Manual Download | Manualshive

Page: 29 / 50

background image

7. Install the host adapters in

Node N

.

For the procedure about how to install host adapters, see the documentation that
shipped with your host adapters and nodes.

8. Power on and boot

Node N

into noncluster mode.

For more information about how to boot nodes, see your Sun Cluster system
administration documentation.

9. If necessary, upgrade the host adapter firmware on

Node N

.

PatchPro is a patch-management tool that eases the selection and download of
patches required for installation or maintenance of Sun Cluster software. PatchPro
provides an Interactive Mode tool especially for Sun Cluster. The Interactive Tool
makes the installation of patches easier. PatchPro’s Expert Mode tool helps you to
maintain your configuration with the latest set of patches. Expert Mode is
especially useful for obtaining all of the latest patches, not just the high availability
and security patches.

To access the PatchPro tool for Sun Cluster software, go to
http://www.sun.com/PatchPro/, click Sun Cluster, then choose either Interactive
Mode or Expert Mode. Follow the instructions in the PatchPro tool to describe your
cluster configuration and download the patches.

For third-party firmware patches, see the SunSolve

SM

Online site at

http://sunsolve.ebay.sun.com

10. If necessary, install a GBIC or an SFP in the FC switch or the storage array.

For the procedure about how to install a GBIC or an SFP, see the documentation
that shipped with your FC switch hardware. For the procedure on how to install a
GBIC or an SFP, see the

Sun StorEdge 6120 Array Installation Guide

.

11. Connect a fiber-optic cable between the FC switch and

Node N

.

For the procedure about how to install a fiber-optic cable, see the

Sun StorEdge 6120

Array Installation Guide

.

12. Install the required Solaris patches for storage array support on

Node N

.

PatchPro is a patch-management tool that eases the selection and download of
patches required for installation or maintenance of Sun Cluster software. PatchPro
provides an Interactive Mode tool especially for Sun Cluster. The Interactive Tool
makes the installation of patches easier. PatchPro’s Expert Mode tool helps you to
maintain your configuration with the latest set of patches. Expert Mode is
especially useful for obtaining all of the latest patches, not just the high availability
and security patches.

To access the PatchPro tool for Sun Cluster software, go to
http://www.sun.com/PatchPro/, click Sun Cluster, then choose either Interactive
Mode or Expert Mode. Follow the instructions in the PatchPro tool to describe your
cluster configuration and download the patches.

Chapter 1 • Installing and Maintaining a Sun StorEdge 6120 Array

29

«
...
27
28
29
30
31
...
»

Summary of Contents for StorEdge 6120



















































Reviews:

No comments

Related manuals for StorEdge 6120

454L / 120 US GAL

Brand: Keter Pages: 12

Plycem Eureka Tank

Brand: Elementia Materials Pages: 6

Brand: U-Line Pages: 3

Brand: Arrow Storage Products Pages: 44

DiskCrypt Mobile DCM300

Brand: DigiSAFE Pages: 27

NXA-WC80211G-CF

Brand: AMX Pages: 6

Brand: oldfields Treco Pages: 32

Brand: Acard Pages: 35

Brand: Fantec Pages: 23

Brand: Seagate Pages: 32

StoreJet 18 mobile

Brand: Transcend Pages: 21

Brand: Transcend Pages: 19

Brand: Edgestore Pages: 91

Brand: Fantom Drives Pages: 10

Brand: Fantom Drives Pages: 8

Brand: Fantom Drives Pages: 10

Brand: Roth Pages: 37

Brand: PowerTec Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands