Sun Microsystems StorageTek VSM GUI, Getting Started Manual

Page: 40 / 68

22 VSM GUI Getting Started Guide • July 2007 Rev A • 312651601
Content Parameters
updated date
The date and time (gmt) when the web content was last updated in an installation or
PTF update. This parameter is required. For example: fri, 06 dec 2002 3:54:00 gmt
translationfile file
Specifies the data set containing the GUI data set name translations. The file
reference can be of the following formats:
DSN:
dsname - for a data set
DDN: ddname - for a DD in the startup proc
The target data set can be a sequential data set or a PDS/PDSE member. The default
is DDN:SKYTRSN which in the sample startup proc SKYPROC references the SMPE
installed translation file. It may be specified more than once for multiple GUI
applications.
Miscellaneous Parameters
allow xxx.xxx.xxx.xxx / mm
Specifies the ip address range allowed to connect to the server. xxx.xxx.xxx.xxx is the
base ip address in dotted decimal notation and mm are the significant bits. For
example,
10.117.186.0 / 24
specifies that connections are allowed from
addresses 10.117.186.*
authenicateexpiry period
The period entries will remain in the authentication cache. Period can be specified in
any combination of hours, minutes or seconds and if no unit is given seconds are
assumed. The default period is one hour.
bufferpool number
Sets the minimum number of request buffers. Allowed range is 0 to 400. Default is
200 buffers.
Config Alter
Decom Alter
Set Migration Options Alter
TABLE 2-8
VSM GUI Authorization Levels and Commands
Commands Authorization Level