Sun Microsystems StorageTek T9840, User'S Reference Manual

Page: 81 / 110

Messages
95739 • Revision YA Chapter 5 Indicators and Messages 81
c n h n d n s n
(Hardware
revision level
supported by the
firmware in this
drive)
The tape drive firmware level is
insufficient to control the tape drive
hardware. Contact authorized service personnel.
CodCrFail1 The tape drive cannot write code onto the
data cartridge tape, or the tape drive
cannot position the data cartridge tape. Ensure that the tape is write-enabled, or try
another cartridge tape.
CodCrFail2 The tape drive cannot read code from the
data cartridge tape. Retry the operation, or try another cartridge
tape. If the problem persists, contact authorized
service personnel.
CodeUpDate The firmware in the tape drive is being
updated from the host; the operator
panel switches are locked. None
CodUpFail1
The tape drive cannot read the data
cartridge tape, or the tape drive cannot
position the data cartridge tape. Try another cartridge tape.
CodUpFail2 The EEPROM failed. Contact authorized service personnel.
CodUpFail3
The tape drive cannot read code from the
data cartridge tape. Retry the operation, or try another cartridge
tape. If the problem persists, contact authorized
service personnel.
CodUpFail4 The data cartridge tape is not a code
update cartridge tape. Try another code update cartridge tape.
If the problem persists, contact authorized
service personnel.
DatCrFail1 The tape drive cannot create (reformat or
reclaim) a cartridge tape. Ensure that the data cartridge tape is write-
enabled, or try to reformat the tape on another
drive. If the problem persists, contact authorized
service personnel.
DmpCrFail1 The tape drive cannot create (reformat or
reclaim) a diagnostic dump tape. Ensure that the data cartridge tape is write-
enabled. If the problem persists, contact
authorized service personnel.
DmpCrFail2 The tape drive cannot read the format of
the data cartridge tape. Retry the operation, or try another cartridge
tape. If the problem persists, contact authorized
service personnel.
DmpWrFail1 The tape drive cannot write diagnostic
data onto the data cartridge tape, or the
tape drive cannot position the data
cartridge tape. Contact authorized service personnel.
DmpWrFail2 There is no diagnostic dump data to
process. Contact authorized service personnel.
xxxx :Dmp y Alternates with * (an asterisk) after
completion of IPL, where
xxxx
=the FSC
of last dump data collected and Y =
number of uncollected dumps in non-
volatile memory.
Contact authorized service personnel who
accesses the diagnostic data and collects it to
tape or to the host.
TABLE 5-2
Operator Panel Display Messages (Continued)
Display Meaning Recommended Action