Sun Microsystems StorageTek T9840, User'S Reference Manual

Page: 61 / 110

Online Menu Operation
95739 • Revision YA Chapter 3 Menus 59
FICON View Configuration Menu Tree (T9840B/C)
Use the online view configuration menu tree as a brief guide.
Online/Offline
[Press Select to toggle, then press Menu to set.]
View CFG ?
(View Configuration) [Press Select to enter, press Menu to bypass.]
Intf FICON
View PrtA?
(view current port attributes)
A=xxxxxxay
(24-bit address identifier, connection type, and port speed - when
port log in is complete)
B=xxxxxxay
(when viewing port B)
SFP module parameters {2G MM0300m/2G SM10.0k}
Hard PA x
{Y/N} (Physical Address)
PA=xx,ddd
(PA=hex, decimal index) (only when Hard PA is yes)
Soft PA XX
{HI/LO} (only when Hard PA is no)
Rate xxxx
{Auto/fixed rate - 2Gb or 1Gb} (interface speed negotiation)
MaxSz xxxx
{2112/2048} (maximum data frame size)
H=xxxxxxxx
(first half, 64-bit port node world-wide-name)
L=xxxxxxxx
(second half, 64-bit port node world-wide-name)
WWN Custom
(only when custom or dynamic WWN is set)
View PrtB?
(current port B attributes) (same sub-menus as port A)
Emul xxxxx {3490/3590/*/*/*/*} (displays current emulation mode)
(*=special modes, used only when directed by Engineering or Tech Support)
Cmprss Xxx
{Yes/Off/No} (compression mode)
Full DSE x
{Y/N} (data security erase mode)
Drv Adr xy
(2-character hexidecimal logical drive address - usually 00)
SL Prot x
{Y/N} (standard label protection mode)
English/Espanol/Francais/Italiano/Deutsch (current language)
Tape Bar x
{Y/N} (tape completion indication)
VolSafe x
{Y/N} (enable VolSafe - write once read many)
Full Code x
{Y/N} (drive memory contains full code load)
CSL Xxxxxx
{Y/N} (CSL operating mode - System/Auto/Manual)
98x Yyyyyy
{x/c} {Normal/Emul} (ID the drive as high-density during an
MVS swap) [x=T9840B only in 3590 emulation modes]
Lib Adr xy
{FF/00-13} (2-character hexidecimal library address) manufacturing
setting is FF and it must be changed to a valid address when the drive is
installed in a 9310 library.
H=xxxxxxxx
(first half, 64-bit drive node world-wide-name)
L=xxxxxxxx
(second half, 64-bit drive node world-wide-name)
WWN Custom
(only when custom/dynamic WWN is set)
S/N=xxxxxx
(drive serial number) (last six-characters of drive DMOD)
Exit CFG ?
(exit view configuration) [Press Select to exit, press Menu to
return to the View CFG? submenu.]