Sun Microsystems StorageTek T10000, Operator'S Manual

Page: 94 / 120

Messages
92 T10000 Operator’s Guide • July 2008 Revision EA • 96174
CodCrFail2 The tape drive cannot read code from the
data cartridge tape. Retry the operation, or try another cartridge
tape. If the problem persists, contact
authorized service personnel.
CodeUpDate
The firmware in the tape drive is being
updated from the host; the operator panel
switches are locked. None
CodUpFail1 The tape drive cannot read the data
cartridge tape, or the tape drive cannot
position the data cartridge tape. Try another cartridge tape.
CodUpFail2 The EEPROM failed. Contact authorized service personnel.
CodUpFail3 The tape drive cannot read code from the
data cartridge tape. Retry the operation, or try another cartridge
tape. If the problem persists, contact
authorized service personnel.
CodUpFail4 The data cartridge tape is not a code update
cartridge tape. Try another code update cartridge tape.
If the problem persists, contact authorized
service personnel.
DatCrFail1 The tape drive cannot create (reformat or
reclaim) a cartridge tape. Ensure that the data cartridge tape is write-
enabled, or try to reformat the tape on
another drive. If the problem persists, contact
authorized service personnel.
DmpCrFail1 The tape drive cannot create (reformat or
reclaim) a diagnostic dump tape. Ensure that the data cartridge tape is write-
enabled. If the problem persists, contact
authorized service personnel.
DmpCrFail2 The tape drive cannot read the format of the
data cartridge tape. Retry the operation, or try another cartridge
tape. If the problem persists, contact
authorized service personnel.
DmpWrFail1 The tape drive cannot write diagnostic data
onto the data cartridge tape, or the tape
drive cannot position the data cartridge
tape. Contact authorized service personnel.
DmpWrFail2 There is no diagnostic dump data to process. Contact authorized service personnel.
xxxx
:Dmp y Alternates with * (an asterisk) after
completion of IPL, where
xxxx
=the FSC of
last dump data collected and Y =number of
uncollected dumps in non-volatile memory.
Contact authorized service personnel who
accesses the diagnostic data and collects it to
tape or to the host.
DumpAgain?
alternating with
Chk xxxx
, where
xxxx
is an FSC.
The Service
indicator is
flashing.
The tape drive detected the same error
within a minute. IPL the tape drive. If the problem persists,
contact authorized service personnel.
DumpToHost The dump or event log is being transferred
to the host; operator panel switches are
locked. None
Exp ClCart The cleaning cartridge is used up. Replace the cleaning cartridge.
Fix CfgErr The checksum does not match after an IPL. Contact authorized service personnel.
TABLE D-1
Operator panel Display Messages (Continued)
Display Meaning Recommended Action