Sun Microsystems StorageTek T10000, Operator'S Manual

Page: 62 / 120

View/Change Configuration Settings
60 T10000 Operator’s Guide • July 2008 Revision EA • 96174
TABLE 4-1
provides details of drive configuration settings, and guidelines for changing
selected settings when the drive is offline.
TABLE 4-1
Drive Configuration Settings
Options Notes Procedure
Online/Offline Menu
Online/
Offline
Defaults to Online at power-on.
Offline must be selected to change
configuration settings.
OffLn Pend might appear while waiting
for a system response or diagnostics
completion.
1. If required, press Menu repeatedly until
Online
or
Offline
appears.
2. Press Select to change modes.
3. Press Menu to advance to the next menu.
View/Change Configuration Menu
View CFG ?
(online)
Chng CFG ?
(offline)
If bypassed, the display advances to the
View/Change TCP/IP Configuration Menu.
This is the entry point to the configuration
submenus.
Do one of the following:
■
Press Menu (No) to bypass
■
Press Select (Yes) to enter submenus.
Interface Select Submenu
Intf FCP
Intf FICON
Defaults to last saved selection.
Enables the drive interface
to run FCP protocol.
Enables the drive interface
to run FICON protocol
In the online (View) mode, only the current
interface selection appears. You must switch
to the offline (Change) mode to toggle the
selection.
Do one of the following:
■
Press Menu to bypass
■
Press
Select
(offline) to toggle; then,
press Menu to set, and initiate an IPL to
load alternate firmware modules.
Note : Manufacturing ships drive FRUs with the Intf FCP option selected. When a defective drive in a FICON
interface is replaced, the selection must be changed to Intf FICON . After IPL is complete the menu system
displays appropriate FICON related items.
Do not select Intf FICON with code level 1.38.207.