Sun Microsystems StorageTek T10000, Operator'S Manual

Page: 70 / 120

View/Change Configuration Settings
68 T10000 Operator’s Guide • July 2008 Revision EA • 96174
Serial Number Menu
S/N=zzzzzz
(online only)
Identifies manufacturing assigned serial
number of the drive.
zzzzzz = the last six characters of the rear
panel DMOD label.
This data is read from an internal EPPROM
for online viewing only.
Press Menu or Select to advance to the
next submenu.
Save Configuration Submenu
Save/IPL ?
(offline only)
This submenu appears only if changes were
made in any submenu.
Saving CFG appears for 2 seconds after
you press Select .
After saving configuration,
the drive performs an IPL.
Do one of the following:
■
Press
Menu
(No) to cancel changes.
■
Press Select (Yes) to save changes and
initiate an IPL.
Exit Configuration Submenu
Exit CFG ? This submenu allows you to repeat the
change configuration submenus, or to exit
configuration submenus. Do one of the following:
■
Press
Menu
(No) to loop back to the
Interface Select Submenu.
■
Press
Select
(Yes) to exit and advance
to the TCP/IP Configuration Menu.
TCP/IP Configuration Menu
View TCP ?
(online)
Chng TCP ?
(offline)
If bypassed, the display advances to the
Firmware Release Level Menu (online) or
the Drive Operations Menu (offline).
This is the entry point for the TCP/IP
submenus.
See
“View/Change TCP/IP Settings” on
page 70 .
Do one of the following:
■
Press Menu (No) to bypass
■
Press Select (Yes) to enter TCP/IP
configuration submenus.
Drive Operation Menu
Drv Menu ?
(offline only)
If bypassed, the display advances to the
Firmware Release Level Menu.
This is the entry point to the offline
drive operations submenus.
See
“Drive Operations Menu” on page 75 .
Do one of the following:
■
Press
Menu
(No) to bypass
■
Press Select (Yes) to enter drive
operation submenus.
Firmware Release Level Menu
Rx.yy.zzza
This submenu displays
current drive
firmware release level
.
Press Menu or Select and advance to the
Exit Main Menu.
Exit Menu
Exit Menu? This menu allows you to stay in the menu
system to return the drive to Online, or to
exit the menu system. Press Menu (No) to go to the Online/Offline
menu
Press
Select (Yes) to exit the Menu
System.
Note : If you exit the menu system with the drive Offline, the display flashes
Offline
every few seconds as a
reminder that drive is still Offline (if a data cartridge has been loaded at least once).
TABLE 4-1
Drive Configuration Settings (Continued)
Options Notes Procedure