Sun Microsystems StorageTek 6140, Manual

Page: 13 / 32

Installing and Configuring a StorageTek Array
This chapter contains the procedures about how to install and configure StorageTek FC RAID arrays.
These procedures are specific to a Sun
TM
Cluster environment.
This chapter contains the following main topics:
■ “Installing Storage Arrays” on page 13
■
“Configuring Storage Arrays” on page 17
For detailed information about storage array architecture, features, configuration utilities, and
installation, see the StorageTek documentation listed in
“Related Documentation” on page 6 .
For a URL to this storage documentation, see “Related Documentation” on page 6 .
Installing Storage Arrays
This section contains the procedures listed in Table 2–1 .
TABLE 2–1
Task Map: Installing Storage Arrays
Task Information
Install a storage array in a new cluster, before the OS
and Sun Cluster software are installed. “How to Install Storage Arrays in a New Cluster”
on page 14
Add a storage array to an existing cluster. “How to Add Storage Arrays to an Existing Cluster”
on page 16
Storage Array Cabling Configurations
You can install your storage array in several different configurations: Figure 2–1 and Figure 2–2 are
two examples.
2
C H A P T E R 2
13