Figure 1–4
PCI Card Slots
9. Fit the card back panel into one of the system chassis card slots, and lower the
card connector so that it touches its associated card slot on the main logic board.
10. Push the card by its corners straight down into the slot until the card is fully
seated.
11. Use a magnetized Phillips screwdriver to attach the card bracket tab to the
system chassis.
12. Detach the wrist strap and close the system unit.
a. Holding the side panel in both hands, guide it so that the hooks align with
the channels on the system unit chassis.
b. Install the lock block if necessary.
Netra Proxy Cache Server to Array Upgrade Instructions
7
