6. Locate the wrist strap (shipped with the PCI card), and attach its adhesive
copper strip to the chassis back panel. Wrap the other end twice around your
wrist, with the adhesive side against your skin.
7. Remove the filler panel from the back panel of the system chassis.
8. Locate a PCI card slot for Sun FastEthernet card.
Use Slot 2, unless that slot is already in use.
TABLE 1–1
PCI Card Slots
PCI Card Slot:
Operating
Frequency
Input/Output Signaling Level:
Usable for
Array
Upgrade?
Slot 1 J1301
33 MHz or 66
MHz
3.3 volts
No
Slot 2 J1401
33 MHz
5.0 volts
Yes
Slot 3 J1501
33 MHz
5.0 volts
Yes
Slot 4 J1601
33 MHz
5.0 volts
Yes
These slots are illustrated in Figure 1–4. The Sun FastEthernet card shipped in the
upgrade kit is a 33 MHz card and thus cannot take advantage of the 66 MHz
capability of slot 1 (J1301). It should be installed in slot 2 (J1401). If that slot is not
available use slot 3 (J1501), or slot 4 (J1601).
Note -
Examples that follow in this document and in the Netra Proxy Cache Array
manuals assume that the second network interface is installed in slot 2 (J1401).
6
Netra Proxy Cache 1.0 Server to Array Upgrade Instructions
♦
Revision A, March 1998
