Chapter 6
Diagnostics
77
▼
To View And Set OpenBoot Configuration
Variables
1. Halt the server to reach the
ok
prompt.
●
To display the current values of all OpenBoot configuration variables, use the
printenv
command.
The following example shows a short excerpt of this command’s output.
●
To set or change the value of an OpenBoot configuration variable, use the
setenv
command:
●
To set OpenBoot configuration variables that accept multiple keywords, separate
keywords with a space.
ok printenv
Variable Name
Value
Default Value
diag-level min min
diag-switch? false false
ok setenv diag-level max
diag-level =
max
Summary of Contents for Fire V240
