Sun Microsystems Ethernet PCI-X Adapter, Installation And User Manual

Page: 45 / 78

Chapter 3 Configuring Driver Parameters 29
10-Gigabit Ethernet Driver Operating
Statistics
These statistics are part of the statistics presented by the k
stat
command.
TABLE 3-5
describes the read-only Media Independent Interface (MII) capabilities.
These parameters define the capabilities of the hardware. The Gigabit Media
Independent Interface (GMII) supports all of the following capabilities.
TABLE 3-5
Read-Only
ixge
Device Capabilities
Parameter Description (Local interface Capabilities)
cap_autoneg
0 = Not capable of autonegotiation
1 = Autonegotiation capable
cap_10gfdx
Local interface full-duplex capability
0 = Not 10000 Mbit/sec full-duplex capable
1 = 10000 Mbit/sec full-duplex capable
cap_10ghdx
Local interface half-duplex capability
0 = Not 10000 Mbit/sec half-duplex capable
1 = 10000 Mbit/sec half-duplex capable
cap_1000fdx
Local interface full-duplex capability
0 = Not 1000 Mbit/sec full-duplex capable
1 = 1000 Mbit/sec full-duplex capable
cap_1000hdx
Local interface half-duplex capability
0 = Not 1000 Mbit/sec half-duplex capable
1 = 1000 Mbit/sec half-duplex capable
cap_100fdx
Local interface full-duplex capability
0 = Not 100 Mbit/sec full-duplex capable
1 = 100 Mbit/sec full-duplex capable
cap_100hdx
Local interface half-duplex capability
0 = Not 100 Mbit/sec half-duplex capable
1 = 100 Mbit/sec half-duplex capable
cap_10fdx
Local interface full-duplex capability
0 = Not 10 Mbit/sec full-duplex capable
1 = 10 Mbit/sec full-duplex capable