Sun Microsystems Ethernet PCI-X Adapter, Installation And User Manual

Page: 69 / 78

53
A P P E N D I X
D
Installing the Sun 10-Gigabit
Ethernet Device Driver on Linux
Platforms
This appendix explains how to install the Sun 10-Gigabit Ethernet PCI-X device
driver in a Linux environment. This appendix contains the following sections:
■
“Setting Up the Driver in a Linux Platform” on page 53
■
“Setting Driver Parameters in a Linux Environment” on page 56
Setting Up the Driver in a Linux
Platform
If your system uses the Linux operating system you will need to perform the
following procedure to be sure the Sun 10-Gigabit Ethernet device driver is properly
installed and loaded.
▼
To Set Up the Driver in a Linux Platform
1. Build the 10-Gigabit Ethernet driver:
where the version is the minor version number such as:
sun-10-gigabit-kernel-1.0.82.6-1.src.rpm
# rpmbuild --rebuild sun-10-gigabit-kernel-1.0.
version
.src.rpm