86
Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006
▼
To Configure Bonding for Multiple
e1000
Interfaces
1. Modify the
/etc/modules.conf
file for 2.4 kernels or the
/etc/modprobe.conf
file for 2.6 kernels file by adding these lines:
where:
■
bond0
is the bonding device.
■
max_bonds
is the number of bond interfaces to be created.
■
mode
specifies the bonding policies.
■
miimon
is the frequency in milliseconds that MII link monitoring will occur.
Refer to Linux documentation for more information.
2. Load the bonding driver:
3. Configure
bond0
interface.
In this example,
bond0
is the master of the two interfaces
eth2
and
eth3
.
alias bond0 bonding
options bonding max_bonds=2 mode=4 miimon=1000
#
modprobe bonding
#
ip addr add 192.12.38.64/24 brd + dev bond0
#
ip link set dev bond0 up
#
ifenslave bond0 eth2 eth3
