26
Platform Notes: The hme Fast Ethernet Device Driver—May 1996
4
These parameter values, described in Chapter 3, are applicable to all
SUNW,hme
devices on the system. Refer to Table 3-2 on page 11 through Table 3-8 on
page 16 for parameter descriptions. For example:
▼
To set the
ipg1
to 10 and
ipg2
to 5 when you reboot
1. Become superuser.
2. Add the following lines to the
/etc/system
file:
3. Save the
/etc/system
file.
4. Save all files and exit all programs. Exit the windowing system.
5. Reboot the system by typing
init 6
at the
#
prompt.
The system is halted and then rebooted.
adv_100T4_cap
hme_adv_100T4_cap
adv_100fdx_cap
hme_adv_100fdx_cap
adv_100hdx_cap
hme_adv_100hdx_cap
adv_10fdx_cap
hme_adv_10fdx_cap
adv_10hdx_cap
hme_adv_10hdx_cap
lance_mode
hme_lance_mode
ipg0
hme_ipg0
set hme:hme_ipg1 = 10
set hme:hme_ipg2 = 5
Table 4-1
Setting Variables in the
/etc/system
File
(Continued)
Parameter
Variable
