Sun Microsystems Dual XFP, User Manual, Page: 56 / 100

38 Sun Dual 10GbE XFP PCI Express Card User’s Guide • January 2009
After you enter the parameter name, the
ndd
utility prompts you for the parameter
value.
2. To list all the parameters supported by the
nxge
driver, type
?
.
Setting Parameters Using the
nxge.conf
File
Specify the driver parameter properties for each device by creating a
nxge.conf
file
in the
/kernel/drv
directory. Use a
nxge.conf
file when you need to set a
particular parameter for a device in the system.
The man pages for
prtconf
(1M) and
driver.conf
(4) include additional details.
The next procedure shows an example of setting parameters in a
nxge.conf
file.
●
To access any man page, type the
man
command plus the name of the man page.
For example, to access man pages for
prtconf(1M)
, type:
# ndd /dev/nxge1 name to get/set ?
? (read only)
function_number (read only)
adv_autoneg_cap (read and write)
adv_10gfdx_cap (read and write)
adv_1000fdx_cap (read and write)
adv_100fdx_cap (read and write)
adv_10fdx_cap (read and write)
adv_pause_cap (read and write)
accept_jumbo (read and write)
rxdma_intr_time (read and write)
rxdma_intr_pkts (read and write)
class_opt_ipv4_tcp (read and write)
class_opt_ipv4_udp (read and write)
class_opt_ipv4_ah (read and write)
class_opt_ipv4_sctp (read and write)
class_opt_ipv6_tcp (read and write)
class_opt_ipv6_udp (read and write)
class_opt_ipv6_ah (read and write)
class_opt_ipv6_sctp (read and write)
% man prtconf