Sun Microsystems Dual XFP, User Manual, Page: 80 / 100

62 Sun Dual 10GbE XFP PCI Express Card User’s Guide • January 2009
▼ To Configure Link Aggregation in a Solaris
Environment
1. Aggregate nxge0 and nxge1 to form an aggregation and a random number 33 as
key.
a. Unplumb the interfaces to be aggregated:
b. Create a link-aggregation group with key 33 without specifying mode:
As the command returns, one line appears in
/etc/aggregation.conf
file and
indicates that the default mode is off, as shown in the following example:
# ifconfig down unplumb nxge0
# ifconfig down unplumb nxge1
# dladm create-aggr -d nxge0 -d nxge1 33
# tail -1 /etc/aggregation.conf
33 L4 2 nxge0/0,nxge1/0 auto off short
#
dladm show-aggr
key: 33 (0x0021) policy: L4 address: 0:3:ba:d8:9d:e8 (auto)
device address speed duplex link state
nxge0 0:3:ba:d8:9d:e8 10000 Mbps full up standby
nxge1 0:3:ba:d8:9d:e9 10000 Mbps full up standby
# dladm show-link aggr33
aggr33 type: non-vlan mtu: 1500 aggregation: key 33