Sun Microsystems Blade X6240, Installation Manual

Page: 45 / 72

Chapter 3 Configuring the Preinstalled Solaris 10 Operating System 33
TABLE 3-1
Worksheet for Solaris 10 Configuration
Information for Installation Description or Example
Your Answers:
Defaults (*)
Language Select from the list of available languages for the
Solaris 10 software. English*
Locale Select your geographic region from the list of
available locales.
Terminal Select the type of terminal that you are using from
the list of available terminal types.
Network connection Is the system connected to a network? • Networked
• Non-networked*
DHCP Can the system use Dynamic Host Configuration
Protocol (DHCP) to configure its network
interfaces? • Yes
• No*
If you are not
using DHCP,
note the network
address: IP address If you are not using DHCP, supply the IP address
for the system.
Example:
129.200.9.1
Subnet If you are not using DHCP, is the system part of a
subnet?
If yes, what is the netmask of the subnet?
Example:
255.255.0.0
255.255.0.0*
IPv6 Do you want to enable IPv6 on this machine? • Yes
• No*
Host name A host name that you choose for the system.
Kerberos Do you want to configure Kerberos security on this
machine?
If yes, gather this information:
Default realm:
Administration server:
First KDC:
(Optional) Additional KDCs:
• Yes
• No*