manualshive.com logo in svg

Sun Microsystems 5220, Getting Started Manual

Share
Download
Sun Microsystems 5220 Getting Started Manual Download Page 70

58

Sun StorageTek 5220 NAS Appliance Getting Started Guide • October 2006

Accessing the Web Administrator

Note –

To use the Web Administrator, the appliance must be connected to your

network, you must know its current IP address, and you must be logged into a client
on the same network as the appliance.

When you connect to the Web Administrator for the first time, the Configuration
Wizard launches automatically.

▼

To Connect to the Web Administrator

1. From a client system on the same network as the appliance, open a web browser

and type the IP address of the Sun StorageTek 5220 NAS Appliance in the address
or location field, for example:

http://123.111.78.99

Press Enter.

Note –

If the client system uses a proxy server and does not locate the appliance,

change the browser’s option to bypass the proxy server for local addresses. See your
browser’s online help or documentation for more information.

Your browser displays the Web Administrator’s login screen. For your convenience,
bookmark this location or add it to your Favorites list so that you do not have to
enter the IP address in future sessions.

2. At the login screen, click Apply.

You can set the password at a later time, using the procedure in the

Sun StorageTek

NAS OS Administration Guide

.

The Systems Operations, Set Time and Date panel is displayed.

3. Select the date, the time, and the time zone, and then click Apply.

This is the only time when the Web Administrator prompts for the date and time. If
these values must be changed, use the Administrator Console.

4. Click Yes to confirm the date and time you set.

The Web Administrator displays the license agreement. Read the license agreement
before you accept it. If you decline, Web Administrator displays the login screen.

5. Accept the license agreement.

The Web Administrator’s Configuration Wizard starts. The wizard guides you
through the process of configuring the Sun StorageTek 5220 NAS Appliance.

Summary of Contents for 5220





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands