background image

 

● 

LOWER  CHAMBER:

  This  displays  the  actual  temperature  of  the  lower 

chamber. It can display temperatures from 0°C to 37°C (32°F to 99°F). 

● 

°C/°F  light:

 When the °C light is on, the temperature displayed is in Celsius. 

When the °F light is on, the temperature is in Fahrenheit. 

Operation of the Buttons 

● 

SET Button of the middle chamber:

 This button sets the temperature in the 

middle  zone.  Each  time  you  press  the  button,  the  set  temperature  increases 
1°C  or  1°F.  The  allowable  setting  range  is  between  5°C  and  12°C  (41°F  to 
54°F). 

● 

SET  Button  of  the  lower  chamber:

  This  button  sets  the  temperature  in  the 

lower zone. Each time you press the button, the set temperature increases 1°C 
or 1°F. The allowable setting range is between 12°C and 22°C (54°F to 72°F). 

● 

LIGHT Button:

 This controls the LED cabinet light.   

NOTE: Once the light is turned on, it will shut off automatically after 10 minutes. 

● 

°C/°F Button: 

Converts the temperature display to Celsius or Fahrenheit. 

● 

ON/OFF Button:

This turns the unit on or off. Press once to start the unit; press 

again to turn it off. 

To  view  the  SET  temperature  for  the  middle  or  lower  chamber  at  any  time,  the 
corresponding  SET  button  once.The  SET  temperature  will  flash  in  the  LED 
display for 5 seconds, then the display will show the internal temperature of  the 
chamber once again. 

Temperature  memory  function:  In  the  event  of  a  power  interruption,  all  previous 
temperature settings will be restored once the power returns. 

NOTES:   

1. This wine cooler has a delay protection feature. Once the unit has lost power 

or is turned off, the compressor will start to work again only after a period of 
3 to 5 minutes after power is restored. 

2.  When  you  use  the  wine  cooler  for  the  first  time,  or  restart  the  wine  cooler 

after  it  has  been  shut  off  for  a  long  time,  there  could  be  a  few  degrees 
variation between the temperature you select and the one indicated on the 
LED readout. This is normal and is due to the length of the inactivation time. 
Once  the  wine  cooler  has  been  running  for  a  few  hours,  it  should  operate 
normally.

 

Door Lock 

This  unit  can  be  secured  with  a  lock  and  key.  The  keys  are  located  inside  the 
plastic bag that contains the 

Own

er’s Manual

. Insert the key into the lock at the 

Summary of Contents for SWC1987T

















Reviews: