13
ANTI-TIP BRACKET INSTALLATION
To reduce the risk of tipping the range by abnormal usage or improper door loading, the range must
be secured by properly installing the anti-tip device packed with the appliance.
Place the anti-tip bracket on the floor as shown in the figure below. The anti-tip bracket can be
installed on either the right or left side.
Mark the locations of the two holes of anti-tip bracket on the floor.
Use a 5/16” masonry drill bit and insert plastic anchor.
Secure bracket to the floor using screws.
Slide appliance into position.
NOTE:
If range is relocated, the bracket must be removed and installed in the new location.
1.30"
5.69"
1.18"
The contour line of back panel of appliance
Install the anti-tip bracket either right or left side.
Anti-tip
Bracket
The c
ontour
line of lef
t pane
l of appliance
The c
ontour
line of r
ight pan
el of ap
pliance
The contour line of front panel of appliance
Move the appliance to the final position.
Anti-tip Bracket
