background image

 
 
 

 

This unit is not designed to operate in enclosed spaces. When placing your unit, 
make sure you allow at least 4” of clearance on all sides.

 

  Use two or more people to move and install freezer.  Failure to do so can result in back or 

other injury. 

  To ensure proper ventilation for your freezer, the front of the unit must be completely 

unobstructed.  Choose a well-ventilated area with temperatures above 60°F (16°C) and 
below 90°F (32°C). This unit must be installed in an area protected from the elements, such 
as wind, rain, water spray or drips, and away from direct sunlight. 

  The freezer should not be located next to ovens, grills or other sources of high heat. 

  The freezer must be installed with its electrical connection in accordance with state and local 

codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in 
accordance with the National Electrical Code and local codes and ordinances is required. 

  Do not kink or pinch the power supply cord of the freezer. 

  The fuse (or circuit breaker) size should be 15 amperes. 

  It is important for the freezer to be leveled in order to work properly. You may need to make 

several adjustments to level it.  

 

I

n order to ensure normal operation of the freezer, after moving it a considerable distance, 

you must wait for ½ to 1 hour before turning the unit on. 

 

After an electrical failure, wait at least 5 minutes before turning on the freezer again or the 
compressor may be damaged. 

  This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety. 

  IMPORTANT: Do not use mechanical devices or other means to accelerate the defrosting 

process, other than those recommended by the manufacturer. 

  IMPORTANT: Do not damage the refrigerant circuit. 

  IMPORTANT: Do not use electrical appliances inside the appliance, unless they are of the 

type recommended by the manufacturer.   

  Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may 

damage or discolor the interior. 

  Do not use this apparatus for other than its intended purpose. 

 

If your electricity goes off, follow this procedure: 

 

Call your power company to see how long the power will be out. 

 

If service is to be interrupted for less than 24 hours, keep freezer closed.  This will help food 
stay frozen. 

 

If service is to be interrupted for more than 24 hours, remove food and store in a frozen food 
locker or other freezer. 

 

SAVE THESE INSTRUCTIONS 

 

3

Summary of Contents for FS21L













Reviews: