Summit FDRD15SS, Instruction Manual

Page: 10 / 24

9
CLEANING AND MAINTENANCE
Cleaning inside the Fridge/Freezer
You should clean the inside of the Fridge/Freezer with a weak solution of bicarbonate of soda. Then rinse with warm water
using a damp sponge or cloth and wipe dry. Wash the baskets in warm soapy water and ensure they are completely dry
before replacing in the Fridge/Freezer.
Cleaning outside the Fridge/Freezer
Use standard non-abrasive detergent diluted in warm water to clean the Fridge/Freezer exterior.
The grille of the condenser at the back of the Fridge/Freezer and the adjacent components can be vacuumed using a soft
brush attachment.
Do not use harsh cleaners, scouring pads or solvents to clean any part of the Fridge/Freezer.
Moving the Fridge/Freezer
1. Remove all items.
2. Securely tape down all loose items (shelves) inside your appliance.
3. Turn the adjustable legs up to the base to avoid damage.
4. Tape the doors shut.
5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the outside of the
appliance with a blanket or similar item.
6. After the Fridge/Freezer is in place it needs to be left off for 4 hours. This allows time for the coolant to settle.
If you
won’t be at home for a long time

Turn off the refrigerator first and then unplug the unit from the wall outlet.

Remove all the food.

Clean the refrigerator.

Leave the doors open slightly to avoid possible formation of condensation, mold, or odors.

Use extreme caution in the case of children. The unit should not be accessible to child's play.

Short vacations: Leave the refrigerator operating during vacations of less than three weeks.
How to save energy

Install the refrigerator in the coolest part of the room, out of direct sunlight and away from heating ducts or registers.
Do not place the refrigerator next to heat-producing appliances such as a range, radiator or dishwasher.

The refrigerator door should remain open only as long as necessary; do not place hot food inside the refrigerator.

Organize the refrigerator to reduce door openings .Remove as many items as needed at one time and close the door
as soon as possible.

The refrigerator door should be properly closed to avoid increased energy consumption and the formation of excess
ice and / or condensation inside.

Constantly circulating cold air keeps the temperature homogenous inside the refrigerator. For this reason, it is
important to properly distribute the food, to facilitate the flow of air.

Cover foods and wipe containers dry before placing them in the refrigerator. This cuts down on moisture build-up
inside the unit.

Do not overcrowd the refrigerator or block cold air vents. Doing so causes the refrigerator to run longer and use more
energy. Shelves should not be lined with aluminum foil, wax paper or paper toweling. Liners interfere with cold air
circulation, making the refrigerator less efficient, which could cause food spoilage.

During prolonged absences (example: vacations), it is advisable to disconnect the refrigerator, remove all the food,
and clean it. The door should be left slightly open to avoid mold and unpleasant odors. This will not affect the
refrigerator when it is reconnected.

During short absences (example: holidays), the refrigerator can remain on. However, remember that prolonged
power outages may occur while you are gone.
Servicing
This product should be serviced by an authorized technician and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the appliance yourself.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where
your purchase was made.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the
appliance, leaving the door ajar to prevent unpleasant smells.