PG 8
www.summitstands.com
FOOTREST ASSEMBLY
13.
Place the Foot Rest (
item H)
between the rails of the Top Ladder Section with the tail end of the Foot Rest BELOW the
welded rod stop. Secure each side using (1) 80mm bolt, nylon washer and lock nut.
See figure 18 and 19.
Part Stack: Foot Rest, Nylon Washer, Top Ladder Section
Note: The bolts will go through both sides of the welded bracket on the Top Ladder Section.
H
WELDED ROD
STOP
18
H
19
PLATFORM SUPPORT BARS
11.
Place the Platform Support (
item I
) onto the SIDE of the Seat Support Frame and secure with (2) 65mm bolts and lock nuts.
See figure 15.
Next, secure the opposite end of the Platform Support to the BACK-SIDE of the Top Ladder Section using (2)
65mm bolts with locknuts.
See figure 16.
12.
Repeat for the other Platform Support.
See figure 17.
I
SEAT SUPPORT
FRAME
15
16
I
TOP LADDER
SECTION
17
