PG 17
CLOSED OR OPEN FRONT - SENTRY
Your treestand is designed to “nest” together as one unit making it easy to transport.
1.
Untie the umbilical cord from the seat climber and wrap it around the platform yoke several times to secure it.
2.
Start with the seat climber portion of the stand. Set it flat on the ground and fold the seat up.
See figure 46.
3.
Take the platform and slide it into the seat climber so that its upright braces and cable bracket are next to the same areas on
the seat climber as shown in
figure 47
.
4.
Secure the top and platform together with the 1” wide green strap with the spring loaded tourniquet buckle as shown in
figure 48
. This will prevent the seat and the platform from making noise as you hike to your hunting location.
5.
Use the backpack straps to carry the unit on your back, tree teeth down. Pull the loose end of the straps to tighten and pull
up on the buckle to release.
NESTING STANDS FOR BACKPACKING
9
SENTRY - ALTERNATE METHOD
1.
Place the Platform down first as shown in
figure 49.
2.
Invert the Seat Platform and place it on top of the platform as shown in
figure 50.
3.
Secure the top and platform together with the 1” wide green strap with the spring loaded tourniquet buckle as shown in
figure 51
.
This method creates a shorter package at the expense of being more top heavy.
46
47
48
49
50
51
