background image

!

CAUTION

DO NOT USE the Razor / OpenShot without a Razor 
/ OpenShot seat or other climber.  NEVER attempt to 
climb without a seat climber.  The climbers provided 
with these stands are designed to aid you in the 
correct operation of the treestand while climbing by 
keeping your weight away from the tree.  The seat 
climber is also built so that it fits securely with the 
platform for carrying.

39

CLIMBING UP (continued)

5. 

 

Razor

 - rest all of your weight on the front padded 

bar.  

OpenShot

 - rest your weigh on your forearms.  

Pulling up and slightly out on the platform while 
pointing your toes down should disconnect the 
platform from the tree.

6. 

 Bring the platform up by raising your legs straight 

up (

figure 41 Razor and figure 42 OpenShot.)

7. 

 To re-engage the platform, simply rotate the edge 

back against the tree upwards, as shown in 

figure 43 

Razor and figure 44 OpenShot. 

The RapidClimb stirrups are located in such a position 
that equal distribution of weight will secure the 
platform to the tree while climbing.

8.

  Now ease your weight back onto the platform 

(to ensure that you have not placed it on an unseen 
knot or limb on the backside of the tree).  Once the 
platform is secure, stand and slide your safety harness 
tether up the tree.  

9. 

 Once the platform is fully supporting your weight 

you can disengage the seat climber and raise it back 
up to just below waist height as shown again in

figure 40 Razor and figure 39 OpenShot

.. 

Repeat steps 4-9

 until you are at your hunting height.

WARNING

!

DO NOT JUMP OR BOUNCE ON THE PLATFORM OR 
SEAT to attempt to cause it to “dig” into the tree.  It 
is not necessary and may cause you to inadvertently 
disengage the platform or seat.

40

USE

1. 

 When you get to your hunting height (do not 

climb higher than 15 feet; it is unnecessary) and you 
have assured that your treestand is level, position your 
seat climber slightly below waist level.  Slightly lower 
will be more comfortable but higher makes for less 
movement when you stand.

2.  

With your safety harness attached to the tree 

above the climber, pull your feet, one at a time, from 
their secured position under the RapidClimb stirrups.

  

WARNING

!

NEVER DISCONNECT FROM YOUR SAFETY HARNESS 
OR SAFETY LINE ONCE YOU LEAVE THE GROUND!!

WARNING

!

ALWAYS position the safety harness to minimize 
the amount of slack in the safety line. 

38

RAZOR

RAZOR

OPENSHOT

41

RAZOR

42

OPENSHOT

page 12

Summary of Contents for 81052





















Reviews: