Compaq 2T-QINTL-18, Installation Information

Page: 1 / 4

© Compaq Computer Corporation. 1999. All Rights Reserved.
® Compaq, ProLiant, and the Compaq logo are registered in the United States Patent and Trademark Office.
ProLiant 1850R Interlock Kit Installation Information
EK-1850R-IN. A01
May 1999
Introduction
The 2T-QINTL-18 interlock kit contains the components for installing the slide assemblies, the interlock system,
and the shipping bracket on the rackmounted ProLiant 1850. The interlock system helps prevent cabinet instability
by allowing only one system at a time to be pulled out of the cabinet. The shipping bracket is used to secure the
ProLiant 1850 in the cabinet during shipment or when moving the cabinet to a new location.
The interlock system consists of a vertical rod, on which are mounted actuator latches for each product installed in
the cabinet. These actuator latches engage the interlock actuator on the rear of rackmount systems. When a
rackmount system is pulled out of the cabinet, the actuator latches rotate to prevent any other rackmount system that
has an interlock actuator from being pulled out of the cabinet.
Table 1 lists the parts that are shipped with the 2T-QINTL-18 interlock kit. The callouts in column 1 refer to the part
location in Figure 1.
Table 1 2T-QINTL-18 Interlock Kit Parts List
Figure 1
Callout Description Part Number Qty.
™
24 inch slide assembly 30-56075-01 1 pair
š
Slide bracket, right front and left rear 74-53881-01 2
›
Slide bracket, right rear and left front 74-53881-02 2
œ
8-32 pan-head screw 90-06038-01 8

Flat washer, .190ID x .051THK 90-06660-00 8
ž
Split washer, .171ID 90-06690-00 8
Ÿ
8-32 hex nut 90-06561-00 8
Interlock actuator 74-53871-01 1
¡
Actuator latch 74-48997-02 1
¢
Stabilizer bracket 74-48996-01 1

10-32 threaded nut bar 74-48998-01 1

10-32 truss-head screw 90-00063-39 4
‘
6-32 truss-head screw 90-00063-10 2
’
Flat washer, .286ID x .066THK 90-06676-00 2
“
Split washer 90-07797-00 2
”
Shipping bracket 74-53874-01 1
•
Flat washer, .221ID x .051THK 90-06664-00 2
–
10-32 Kep nut 90-06565-00 2
ProLiant 1850R Interlock Kit
Installation Information
EK-1850R-IN 1