10
-
Model SWC1875B
4
2
10
5
6
7
8
3
4
1
1. Remove the plastic cover (1) then remove the bottom hinge (3) by unscrewing the four screws (2). Be
careful to hold the lower glass door (4) firmly after removing the screws. And then gently pull down to
remove the lower glass door from the middle hinge and place it on a padded surface to avoid the risk
of damage. (Fig. 1)
2. Unscrew and transfer the door adapter (5) and (8) to the designated opposite position of lower glass
door. At the same time unscrew and transfer door stopper (9) of the bottom hinge to the opposite side.
(Fig. 2 &3)
3. Remove the door adapter (15) by unscrewing the two lock screws (14). Be careful to hold the upper
glass door firmly after removing the screws. And then gently pull down to remove the upper glass door
(16) from the top hinge and place it on a padded surface to avoid the risk of damage. Then remove the
right top hinge (11). (Fig. 5 & 4)
4. Unscrew and transfer the middle hinge (13) and the middle fixing plate (12) to the opposite position.
(Fig. 5)
5. Pop out the cover caps on the left side of cabinet and use them to
cover the screw holes on the right
hand side.
6. Screw the alternative left top hinge (10), included in the fittings,
on the left hand side of cabinet. (Fig.
4)
7. Relocate the door adapter (15) on the middle hinge.
8. Set the upper glass door to the designated position and install the two lock screws to connect the door
adapter (15) with the upper glass door and tighten them before the door is leveled.
9. Set the lower glass door to the designated position and reassemble the bottom hinge, then reinstall
the plastic cover.
