15
When the unit is plugged in for the first time, the unit will power up automatically to the preset
defaults. The preset temperature at the factory for the
UPPER
temperature zone is 50ºF (10ºC)
and for the
LOWER
temperature zone is 60ºF (16ºC).
You can press the left side
UP
and
DOWN
keys to control the internal temperature of the
UPPER
temperature zone and press the right side
UP
and
DOWN
keys to control the internal
temperature of the
LOWER
temperature zone. When you press the two keys at the same time,
the display will show the last temperature set previously.
NOTE: The temperature set for the LOWER temperature zone must always be just as high
as or higher than that in the UPPER temperature zone. For optimal performance, the set
temperature of the two zones should differ by at least 8F°.
The temperature that you desire to set will increase 1ºC or 1ºF if you press the
UP
key once; on
the contrary the temperature will decrease 1ºC or 1ºF if you press the
DOWN
key once. The
display flashes while you make the setting.
After the temperature has been set, the display shows the current inner temperature of the
particular temperature zone.
To view the set temperature at any time, press the
UP
or
DOWN
key; the set temperature will
temporarily flash in the display for 5 seconds. Then the display shows the current inner
temperature again.
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection. The
LIGHT
switch allows you to toggle between 2 modes of operation for the internal lights: functional
(default) mode and showcase mode. If you are in functional (default) mode (also named as energy saving
mode), the lights will turn on only when the door is open. If you are in showcase mode, the lights will be
on whether or not the door is open.
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the
displays, interior light and audible alarms and prevents them from turning on again. Normal cooling
operations will still take place.
To initiate Sabbath mode, press the
POWER
and
LIGHT
keys at the same time for at least 5 seconds.
The indicator light will flash four times and confirm the Sabbath mode is ON.
Sabbath mode can be canceled by repeating the above process. The Sabbath Mode will automatically
turn off after 96 hours.
NOTE:
If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.
