21
TROUBLESHOOTING
If any irregularities occur during normal operations, turn the dryer off, and wait one minute. Turn
the dryer back on, and repeat the drying program. Most errors can be solved by trying the
suggestions below:
Problem/error
Cause
What to do?
The machine will
not start.
•
The dryer is not turned
on.
•
Check whether the main power switch
is on.
•
There is no voltage in the
power outlet.
•
Check the fuse.
•
Check if the power cord plug is
correctly inserted into the power outlet.
There is voltage in
the outlet, but the
drum does not
spin and the
appliance does not
work.
•
The door is not shut.
•
Check if the door is closed properly.
•
The condensation tank is full.
•
Empty the condensate tank.
See the CLEANING AND
MAINTENANCE section.
•
The
START DELAY
function was set.
•
Program was not started in
accordance with the
instructions.
•
To deactivate the start delay option,
press the (8)
START DELAY
button
and hold for 3 seconds.
•
Re-read the instructions for use again.
The appliance
stops heating
completely during
a program.
•
The net filter may be
clogged. As a result, the
temperature in the dryer
rises, which causes
overheating, and therefore
heating is switched off.
•
Clean the net filter. See the CLEANING
AND MAINTENANCE section.
•
Wait for the appliance to cool down,
and try running it again. If the dryer
still fails to start, call a service
technician.
A slight hitting
noise appears.
•
If the dryer is out of use for
a long period of time, the
support elements are under
stress at the same point.
•
The noise will subside without any
intervention.
The door opens
during drying.
•
There is too much laundry
in the drum.
•
Remove some amount of laundry.
Unevenly dried
laundry.
•
Laundry of varying types
and thickness was dried at
the same time, or there was
an excessive amount of
laundry dried in one load.
•
Make sure you have sorted the
laundry by type and thickness,
whether you have added a suitable
amount of laundry to the drum, and
whether you have selected a suitable
program. See the PROGRAM TABLE
section.
Laundry not
dried or drying
takes too long
•
Filters are not clean.
•
Clean the filters. See the CLEANING
AND MAINTENANCE section.
•
The dryer is placed in a
closed room, the room is
too small, or the room is too
cold. The ambient air
overheats as a result.
•
Make sure there is adequate supply of
fresh air to the dryer. For example,
open the door and/or window.
•
Check if the temperature in the room
where the dryer is installed is too
high or too low.
Summary of Contents for LDHP24
Page 26: ...26 NOTES...
Page 27: ...27 NOTES...
