13
The bottom of the grill must be supported on both sides and back or full width with opening as shown for gas
connection.
Electrical
Electrical outlet for Rotisserie motor must be installed to the left side of the grill.
The outdoor cooking gas appliance, when installed, must be electrically grounded in accordance with local codes
or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical
Code,
CSA C22.1.
Keep any electrical supply cord and fuel supply hose away from any heated surface.
BRIQUETTES:
Place briquettes burner cover above each burner.
Leak Testing
All gas piping and connections must be tested for leaks after installation or service. All leaks must be corrected
immediately.
Open the valve (shut-off or ‘ON’ LP tank). Test for leaks by applying liquid soap solution to all joints. Bubbles
forming indicate gas leak.
NEVER USE AN OPEN FLAME TO CHECK FOR LEAKS.
