6
7
Wall Mount Remote Control
Model SelectAire
This is a non-polarized control
This is an optional control device that provides the following
options; System Off, Auto/Off, Intermittent, Fan Speed Low,
Medium or High.
This control is connected to the Main HRV terminal block using
18/2 thermostat wire.
Up to two (2) SelectAire controls can be installed on one HRV.
Refer to wiring diagram for connection method.
Wall Mount Dehumidistat
Model SRDEH
This is a non-polarized control
This is an optional device providing indoor relative humidity
control. Activation occurs when the indoor humidity is higher than
the selected level. The HRV will function at high-speed fan until
the indoor humidity is lower than the set point on the control. The
HRV control will then default to the pre-selected mode.
This control is typically installed in an area of the home where
humidity may require automatic monitoring. This could be a
central location (i.e. near furnace thermostat) or in a specific
room (i.e. kitchen, laundry etc.).
Connect to HRV using 18/2 thermostat wire.
Connect one lead to “DEH” and the second to “GRD” at the
HRV. Refer to Wiring Diagram.
Summary of Contents for Proventor II Series
Page 2: ...2 ...