![background image](http://html.mh-extra.com/html/summeraire/proventor-ii-series/proventor-ii-series_installation-and-troubleshooting-manual_1391126010.webp)
10
11
6.
CONDENSATE DRAIN HOSE INSTALLATION
Two (2) drain spigot assemblies are provided. These are to be installed through the drain pan holes
provided. Install the spigot through the openings and secure in place by installing the nylon washer
and nut on the outside of the cabinet. Ensure that the drain holes that are not used are plugged with
the drain plugs installed in the cabinet. Once installed, attach 1/2” plastic tubing (not supplied) to the
spigots. Create a trap by forming a loop in the tubing. This will prevent the cross contamination of
the air streams through the tubing. Ensure that the condensate drain tubing is not exposed to freezing
temperatures. Typically the drain line is connected into a floor drain, sink or stand pipe.
Drain Opening Plugs
Create Trap
HEAT RECOVERY VENTILATOR
EGDK:CIDG
Summary of Contents for Proventor II Series
Page 2: ...2 ...