2
INSTALLATION
GENERAL INSTRUCTIONS
ALPHA series electric furnaces are designed, built and inspected to provide
safe and dependable operation when properly installed in compliance with all
National and Local Codes.
The Alpha series of warm air electric furnaces are available in the following
models; 10kW,15kW,18kW, 20kW, 23kw and 27kW outputs .
ELECTRICAL
All electrical equipment and wiring shall be installed following the requirements
Canadian or U.S.A. National Codes.
These electric furnaces require 120/240 vac, 1 phase , 60 Hz – 3 wire power
supply (C/W neutral).
LOCATION
The furnace shall be centrally located in relation to the outlet registers, with
suitably sized warm air ducts, for improved heat distribution.
MULTI POSITION
Alpha series electric warm air furnaces can be installed for vertical, horizontal, or
down flow operation.
NOTE
: An optional “ DownFlow “ base shall be installed with units over
23 KW. All panels / doors must be secured in place prior to starting unit.
A filter frame C/W disposable filter is supplied to suit 20 x 20 x 1 filter.
Summary of Contents for ALPHA
Page 9: ...9 Fig 2 MAIN CONTROL BOARD ...
Page 11: ...11 Fig 4 ...
