Sumitomo HF-430NEO Series, User Manual

Page: 17 / 25

4-2
Chapter 4 Installation and Wiring
4.4 HF-TM2 Terminal arrangement
■ Input terminals (M3 screw terminal)
• Regarding to the default setting of parameters for each terminal function, refer to the user ′ s guide for
HF-430NEO.
• Refer to “4.3 Wiring of HF-TM2” as wiring sample.
• All of terminal “CM1” has same electrical potential.
• The logic for input terminals (Sink/Source) can be switched by the connection of the jumper.
Terminal
symbol
Terminal
name
Description Electric characteristics
Inp
ut
t
er
m
in
al
D
ig
it
al in
p
ut
C
ont
ac
t
FR, RR
DFL,DFH
AUT,MBS
JOG,ES
RST
Input
terminal
Each terminal can select input
terminal functions by parameter
setting.
Switch the connection of jumper to
select the sink logic and source logic.
Voltage across input and PLC:
• ON Voltage Min. 18 VDC
• OFF Voltage Max. 3 VDC
• Max. allowable voltage 27 VDC
• Load current 5.6 mA(at 27 VDC)
P
ow
er
s
up
p
ly
P24
24 VDC
output power
supply
terminal 24 VDC power supply for contact
signal. When using source logic,
“P24” terminal become common
terminal for input contact.
100 mA output at maximum
BC
Common for
24 VDC
output power
supply
terminal
This is a common terminal for power
terminal “P24” and digital input
terminal “FR, RR, DFL, DFM, AUT,
MBS, JOG, ES, RST”. When using sink
logic, “BC” become common
terminal for input contact.
There are two “BC” terminals.
-
PCS
Common for
Input
terminal
Switch the connection of jumper to
select the sink logic and source logic.
Short circuit P24-PCS: Sink logic
Short circuit BC-PCS: Source logic
When using external power supply for
contact input, remove the jumper and
connect “PCS” terminal with
external interface.
-
Logic of input terminals
In the factory setting, the logic for input terminals is the sink logic.
To switch the input control logic to the source logic, remove the jumper connecting terminals P24
and PCS on the control circuit block, and then connect terminals PCS and BC with the jumper.
FC
DRV OM X3 DFM MBS JOG BC P24 AMI IRF
FA
RR PCS VRF COM
FB
UPF X1 X2 DFL AUT BC ES TH FRQ AMV FR RST VF2 ＋ V
SP
SN
RP
SP
SN
BC
HF-TM2 Terminals
SW
1
Jumper (Default position)
FC
4-5