Operation & Maintenance Manual
3
Cyclo® BBB4
Cyclo® BBB4
Delivery
Inspection Upon Delivery
• In order to avoid injury,
ensure that the unit is in
a stable position
before unpacking .
•
Verify that the unit received matches your
order .
Using the incorrect product may cause
equipment damage or personal injury .
•
Do not
remove the nameplate from the unit .
Upon delivery, inspect the unit for damage that may have
occurred during shipment . Notify the shipping company
immediately if you find any damage .
Do not
install or operate a
damaged unit .
Upon receipt of the reducer/gearmotor, verify that:
• the model number on the unit nameplate matches the
purchase order
• the unit was not damaged during shipping
• all bolts and nuts are fully tightened .
Please consult your Sumitomo agent, distributor, or sales office if
you find any defects or if you have any questions .
Nameplate Inspection
When contacting Sumitomo about this product, please be
prepared to provide the following information from the reducer/
gearmotor nameplate:
• reducer or gearmotor model number (nomenclature)
• reduction ratio
• serial number .
Lubrication Inspection
•
Oil lubricated units are shipped without oil,
unless the customer specified otherwise when
the unit was ordered .
Always fill the unit with
the correct type and quantity of lubricant prior to
operation . In case shipped with oil, please follow
installation procedure .
•
Certain models must be filled with lubricant in
two separate locations,
the Bevel Gear portion
(output) and the input portion .
Refer to the lubrication section in this manual for detailed
lubrication information .
Nominal
Reduction
Ratio
Unit Model
Number
Unit Serial
Number
Non-Metallic Nameplate
(when Cyclo input is 613 or larger)
Nominal
Reduction
Ratio
Unit Serial
Number
Unit Model
Number
Non-Metallic Nameplate
(when Cyclo Input is 6120 or smaller)
Nominal
Reduction
Ratio
Unit Serial
Number
Unit Model
Number
Metal Reducer Nameplate
Metal Gearmotor Nameplate
Unit Serial
Number
Unit Model
Number
Nominal
Reduction
Ratio
