Floor–All Positions
Y1
Y2
Y3
Y4
Y5
Y6
10
Cyclo
®
BBB
Lubrication
Oil lubricated models are not filled
with oil prior to shipping.
Before operating, fill the unit with the appro-
priate amount of the correct lubricant for the
mounting position (see Figure 22 and 24).
When operating in winter or other relatively
low ambient temperatures, use the lower vis-
cosity oil specified for each ambient tempera-
ture range. Please consult the factory if the
unit will be operated consistently in ambient
temperatures other than 32°F–104°F.
Grease lubricated models are lubri-
cated with grease prior to shipment
from the factory.
Adding grease prior to initial start-up is not
required. If grease must be replenished or
changed (see Grease Lubrication section),
avoid using greases other than those listed in
the Figure 23. Please consult the factory when
the units will be used in widely fluctuating tem-
peratures, ambient temperatures other than
those specified in Figure 23, or when other
special conditions exist for the application.
When motors from another manufacturer will
be used, please consult and adhere to the
associated motor maintenance manual for the
appropriate lubrication instructions.
3A100, 3A105, 3A110, 3A115
3A120, 3A125, 3B120, 3B125
3A140, 3A145 3B140, 3B145,
3C140, 3C145, 3B160, 3B165,
3C160, 3C165, 3D160, 3D165,
3C170, 3C175, 3D170, 3D175
3E170, 3E175
Output
(Gear Side)
Input
(Cyclo Side)
Motor Horizontal
Motor Vertical
Oil Bath
Grease
Grease
Grease
Unit Size
Oil Bath
Ambient
Temperature (°F)
ChevronTexaco
Exxon Oil
Mobil Oil
Shell Oil
BP Oil
14 to 41°
EP Gear
Spartan EP Mobilgear 600 XP 68
Omala Oil
Energol
Compound 68
68
(ISO VG 68)
68
GR-XP 68
32 to 95°
EP Gear
Spartan
Mobilgear
Omala Oil
Energol
Compound
EP 100
600 XP 100, 150
100, 150
GR-XP 100
100, 150
EP 150
(ISO VG 100, 150)
GR-XP 150
86 to 122°
EP Gear
Spartan
Mobilgear
Omala Oil
Energol
Compound
EP 220
600 XP 200
220, 320
GR-XP 220
220, 320, 460
EP 320
320, 460
460
GR-XP 320
EP 460
(ISO VG 220–460)
GR-XP 460
Figure 21. Lubrication Type Per Unit Size
Figure 22. Standard Oils
Ambient
Reduction
Input
Temperature (°F)
Ratio
(Cyclo Side)
11, 18:1
Shell Alvania
EP R0
14 to 122°
21:1 and higher
Exxon
Unirex
N2
Figure 23. Standard Greases
Oil Drain Plug
Oil Overflow Plug (Oil Level)
Oil Fill Plug
Figure 24.
Oil Plug Locations