29
28
Common
8. Daily inspection and Maintenance
(4) Oil supply and discharge
Bevel BUDDYBOX 5 & 4 Series (Except Y2, F2, G2, K2, V2, W2)
●
Oil supply
1 Remove the air-vent plug on oil supply port.
2 Supply oil on the oil supply port while checking the level of oil surface through the oil level gauge.
3 Make sure that the level of oil surface is at the middle of oil level gauge after it has settled.
4 Attach the air-vent plug to oil supply port.
5 When air-vent plug is attached, check the seal washer set and the cap of air-vent plug closed steady.
(Check the cap of air-vent plug regularly because ti may loosen by vibration)
●
Oil discharge
1 Remove the drain plug to discharge oil.
2 When the drain plug is attached, check the seal washer set.
Oil supply port
Oil discharge port
Oil gauge
Casing
Air-vent plug
Cap of air-vent plug
Seal washer
Oil supply port
Oil discharge port
Oil gauge
[Locations example of oil supply / discharge ports]
[Detail of oil supply port]
Bevel BUDDYBOX
LHYM-Y1 (5 Series)
Bevel BUDDYBOX
LHYM-Y1 (4 Series)
Bevel BUDDYBOX 5 & 4 Series (Y2, F2, G2, K2, V2, W2)
●
Oil supply
1 Remove the air-vent plug and oil fill cup lid on oil supply port A. (The air-vent plug and oil fill cup lid do not needed to be
separated)
2 Supply oil on the oil supply port A while checking the level of oil surface through the oil level gauge.
• Bevel BUDDYBOX 4Series can be shorter oil filling time with using both oil supply port B.
• At first remove the plug on oil supply port B, and supply oil into the output side gear casing. After checking that inside of
output side gear casing is filled with oil, attach the plug to oil supply port B. When the drain plug is attached, check the seal
washer set.
• Next, supply oil on oil supply port A to fill with oil in input side gear casing.
3 Make sure that the level of oil surface is at the middle of oil level gauge after it has settled.
4 Attach the air-vent plug and oil fill cup lid to oil filler.
5 When air-vent plug and oil filler cup lid are attached, check the seal washer set and the cap of air-vent plug closed steady.
(Check the cap of air-vent plug regularly because ti may loosen by vibration)
●
Oil discharge
1 Remove the drain plug to discharge oil.
2 When the drain plug is attached, check the seal washer set.
Oil supply
port A
Oil gauge
Oil discharge port
Oil discharge port
Oil supply
port B
Oil gauge
Oil supply
port A
Oil discharge port
Oil gauge
Oil supply
port A
Oil supply
port A
Oil gauge
Oil gauge
Oil discharge port
Oil discharge port
Oil filler cup
Air-vent plug
Cap of air-vent plug
Oil filler cup lid
Seal washer
[Locations example of oil supply / discharge ports]
[Detail of oil supply port]
Bevel BUDDYBOX
LHYM-Y2 (5 Series)
Bevel BUDDYBOX
LHYM-Y2 (4 Series)
