11
(c–1) How to set a torque arm (03#, 07#, 17#, 1010#)
Mount a torque arm on the driven machine side of the Drive casing. Use hexagon
socket head bolts for mounting. (See Table 3 for bolt sizes.)
Torque arm anti-rotation stopper should be designed so as to allow movement of the
torque arm to make sure that the contact surface between the Drive and shaft are free
from excess force.
Don't fix the torque arm by anti-rotation bolts.
For such applications as requiring frequent start and stop or frequent reversing of the
rotating direction, insert a rubber bushing between the torque arm and securing bolt (or
spacer) in order to relax impact load.
Table 3 Size of hexagon socket head bolt
Frame size
Bolt
03#
M5
M6
07#, 17#, 1010#
(d–1) How to remove the shaft (03#, 07#, 17#, 1010#)
Make sure that excess force does not act on Drive and shaft.
COMMON
Fig.8 A-part securing methods
Torque
arm
Spacer
Plain
washer
Special bolt
(or Pin)
Keep some
allowance
Rubber bush
No allowance
between the
torque arm and
the machine
Driven machine side
A
(Adjust the allowance according to the
movement of the machine.)
Good example
(Excessive force on the whirl stop
bolt. machine, and Hyponic may
cause damage.)
Bad example
4. Installation
