Maintenance
Approved work and not approved work
• Do not do other maintenance than in the instructions in this document.
• Do not change or do repairs on the device without the written approval of S.D.T. If you
do make changes or repairs without written approval, S.D.T. is not liable.
• Do the maintenance tasks that the maintenance schedule shows.
• Only replace parts with parts from S.D.T.
• If you cannot follow the instructions or if you think that an instruction is not available,
speak to S.D.T.
Maintenance schedule
Task
Limit
Instruction
Clean the device
1 week
Refer to section
on page 47.
Do a check on the seals
1 week
Refer to section
on page 47.
Do a check on the measured
values
1 week
Refer to section
48.
Clean the sensors
When you replace the oil in the
installation
Refer to section
on page 48.
Clean the device
Procedure
1. Remove all contamination from the device. If necessary, use a moist cloth and a
non-aggressive cleaning agent.
Do a check on the seals
Procedure
1. Do a check for damage to the seals of the device.
2. If you see damage, get in contact with S.D.T. immediately.
Caution: Do not use the device if you see damage to the seals.
9
9.1
9.2
9.3
9.4
Maintenance
UM_LM2 Gears CMS_003_EN
47
