Do a check on the measured values
Procedure
1. On the dashboard, go to the Site selector screen.
2. Select a site.
3. Click on the Device button.
4. Select the device.
5. Open the Device tab.
6. Do a check if the values are updated.
7. If the values are not updated, contact S.D.T.
8. Examine the values for irregularities.
Zoom in on irregularities for a detailed display.
Clean the sensors
Clean the sensors when you replace the oil in the installation.
Procedure
1. Remove the sensor.
2. Move around the part of the sensor that comes into contact with the oil in isopropanol
or petrol.
3. Install the sensor.
9.5
9.6
Maintenance
48
UM_LM2 Gears CMS_003_EN
