6
1.8 Nameplate
See chapter 1.8 of the Installation and Operating Instructions 6006183 / 6005672.
2 - 3
Safety; Transport and storage
See chapter 2 - 3 of the Installation and Operating Instructions 6006183 / 6005672.
4
Product description
4.1
General description
See chapter 4.1 of the Installation and Operating Instructions 6006183 / 6005672.
4.2
Structural design RW 480
10
9
6
2
3
8
1
12
11
5
7
4
0551-0043
Legend
1 Bracket
2 Cable inlet
3 Connection chamber
4 Propeller shaft
5 Stator
6 Bracket with shackle
7 Motor housing
8 Mechanical seal
9 Propeller boss / Propeller
10
Gear
11 Shaft unit with rotor and bearings
12 SD - ring
Figure 2 RW 480
4.3
Operation with frequency inverters
See chapter 4.5 of the Installation and Operating Instructions 6006183 / 6005672.
5 Installation
See chapter 5 of the Installation and Operating Instructions 6006183 / 6005672.
5.1
Installation RW 480
See chapter 5.1 of the Installation and Operating Instructions 6006183 / 6005672.
5.2
Propeller assembly RW 480
The propeller fixing differs from all other units of RW/RCP and SB-KA series due to design. The propeller of the RW 480 is fixed with an
encapsulated clamping element.
1
2
3
4
5
6 7
0551-0044
Legend
1 Socket head screw
2 Propeller washer
3 Lock washers
4 O-ring (socket head screw)
5 O-ring (oropeller washer)
6 Clamping element
7 O-ring (boss)
Figure 3 Propeller assembly / dismantling
Dismantling
•
Dismantle socket head screw (3/1) with lock washers (3/3), o-ring (3/4), propeller washer (3/2) and o-ring (3/5).
EN 6184-E