16E / 16E-H / 16E-P Spray Gun
57
MAN 96150 EN 01
5. Remove countershaft plug (157) from countershaft bearing
retainer (160).
6. Hold countershaft assembly (9, 162 & 164) with glove or cloth and
remove nut (158) from countershaft (164). Disassemble counter-
shaft bearing retainer (160) and ball bearing (159) from counter-
shaft assembly.
7. Remove set screw (9) securing countershaft gear (162) to counter-
shaft (164) and remove countershaft gear from countershaft.
8. Remove nut (158) from drive shaft (173).
9. Remove four screws securing gear cover (156) to central housing
(129) and remove gear cover and gasket (176).
10. Remove plug (171) from front of gear cover (156).
11. Only if necessary for replacement, remove two ball bearings (159)
and one bearing (166) from gear cover (156).
12. Remove drive shaft assembly (9, 172-174) and drive shaft seal
(175) from central housing (129).
13. Disassemble drive shaft only if necessary to replace parts:
a. Remove set screw (9) securing drive shaft gear (172) to drive
shaft (173) and remove drive shaft gear from drive shaft.
b. Remove bearing (174) from drive shaft (173) by pulling off from
inner race of bearing.
