Sullivans QUILTER'S DESIGN TABLE 38434 Instructions Manual Download Page 9 | Manualshive

Page: 9 / 9

Sullivans QUILTER'S DESIGN TABLE 38434 Instructions Manual Download Page 9

Page 9

Rev. 01-21-21

www.SullivansUSA.net

4F

INSTRUCTIONS

STOP

DO NOT RETURN TO THE STORE.

For assistance with missing or

replacement parts, installation, or

any additional information, please

call us at

800-862-8586

or email

[email protected].

Pull 2 Sliders (#20) out carefully from Left Panel (D) and Right

Panel (E). These will attach to the Drawer completed in

Step 4E.

Line up the holes in the Sliders with predrilled holes on Side

Drawer Panels (Q & R). Use 6 Screws (#1) and a Screwdriver to

attach 2 Sliders (#20) to the Drawer.

Use 4 Screws (#1) and the previously installed 2 Hinges (#6) on

Left Panel (D) to attach Left Door Panel (V).

Use 6 Screws (#1) and the previously installed 3 Hinges (#6) on

Right Side Panel (I) to attach Right Door Panel (O). Separate knob

and screw to install 1 Handle (#14), with the knob on the outside

of Right Door Panel (L) as shown.

Your Sullivans Quilter’s Design Table is complete - Enjoy!

4F

#1

#14

#1

#1

«
...
7
8
9

Summary of Contents for QUILTER'S DESIGN TABLE 38434










Reviews:

No comments